※ digital network audio control host system core, the use of high-grade aluminum 6U black drawing panel, nice;
※ Industrial cabinet design, chassis with steel structure, a higher anti-magnetic, dust, anti-impact capacity;
※ all digital transmission to the local area network or an independent IP with the Internet as the main transmission medium;
※ support dedicated 100M network transmission, transmission distance is not restricted, up to tens of sets or hundreds of sets of program source, and to achieve a multi-network integration;
※ comes with 8 input (5 lines, 3 microphones), 4 audio output;
※ Each input channel has independent rear volume adjustment;
※ All input channels audio with uniform high and low tone adjustment;
※ Built-in 16-channel 10 / 100m adaptive switch, support port auto flip (auto mdi / mdix);
※ 16 dynamic led lights, providing a simple working status tips and troubleshooting;
※ UTP port supports auto-negotiation function, automatically adjust the transmission mode and transmission rate;
※ audio playback support a variety of modes, order / cycle / random / limited time to play;
※ audio terminal support virtual logical partition, can be arbitrarily nested to facilitate management;
※ graphical state display, working status at a glance, intuitive and clear;
※ support fast playback operation, quick play can define multiple audio playback;
※ all network audio equipment automatically found, automatic monitoring of state changes;
※ 12.1 inch LED LCD screen, built-in 5-wire industrial reinforced touch screen, easy to use touch screen control;
※ industrial-grade motherboard design, dual-core four-thread ultra-low power embedded industrial processor, processing faster, more operational performance, can be a long time without electricity stable work;
※ built-in high-capacity SSD solid state hard drive, with anti-vibration, anti-drop, read and write speed, low power consumption;
※ can set the automatic switch machine function, the real sense of the realization of unattended function;
※ After running the server software system management and control center, the server software using the background system services to run, is the enterprise-class standard server work mode, boot system can automatically run, compared to run at the front of the interface software has a higher stability and reliability;
※ has a backup function, increase the standby IPC can be achieved server software data sharing, real-time detection of the working status of the main industrial computer, and to achieve automatic fault control, can be a complete alternative to the main control of industrial control functions;
※ support DHCP, compatible routers, switches, bridge gateway, Modem, Intelnet, 2G, 3G, 4G, multicast, unicast and any other network structure.
※ screen size 12.1 inches; ※ screen color TFT262144 color color; ※ control mode 1024 x 768 resolution LCD resistance (five lines) touch screen; ※ Ambient temperature: 5 ℃ ~ 50 ℃; 5. Relative humidity: 20% to 80% relative humidity, no condensation; ※ motherboard Asus / Intel B85 chipset, X86 architecture; ※ standard interface 3 × PCI slot, 2 × SATA II interface; 4 × SATA III interface, 8 USB2.0 interface, 4 USB3.0 interface; ※ hard disk: SSD solid state hard drive; ※ memory DDR3 / 4G, 1600MHZ; ※ NIC Realtek RTL8111GR Gigabit Ethernet; ※ CPU Haswell dual-core 4-thread, 3.7GHz, DMI2 bus; ※ System audio signal SNR LINE: 70dB; MIC: 60dB; ※ System audio signal distortion 1KHz <0.5%; ※ System audio signal standard input level LINE: 350mV; MIC: 10mV; ※ system audio signal standard output level 0dBV; ※ own power consumption: AC ~ 220V / 50Hz / 350W; ※ Size: 484 (width) × 300 (depth) × 310 (high)